Thursday 25 August 2016

Stuff to report but nothing to show...

Despite working on various projects none are in a position to be shared, so as I'm off for a well deserved rest next week I thought I'd do a quick update post as to what I've been up to recently, that I thought might be of interest

Dropzone commander escalation league:
The DZC league I started in February that was due to finish in May finally finished this month!
The league was great at first, but as it went on it did get a little tiresome as some players were unreliable.
Lessons have been learnt and I know to handle things differently if I do another.

3k DZC game!
That's right! I took part in a 3k game of DZC. I used my Scourge and was defending a town, against the UCM.
It was an interesting setup as I controlled the Scourge, and three of my friends controlled the UCM.
In the end it was a scourge victory.
We played on a 6x4 board, half of the board was densely populated with buildings, with a river and two bridges.
The Scourge had a 3ft deployment zone and the UCM a 1ft deployment.
We played up the length of the board
Scourge were deployed as "blips", the theory being that the UCM knew they were there but they didn't know what units. The blips were revealed if in los of a UCM unit, if a UCM FM went over or if they the UCM opponent chose to fire at one he's roll on a table
1 - Nothing discovered, shot failed
2-5 - unit discovered
6 - all units within 6" of the intended target are discovered.

The mission was for the UCM to secure and hold two bridges (a focal point each), the landing pad (focal point). A sub-mission was for the UCM to discover and reveal the three pieces of Intel hidden in three building these were shown as normal.

We also disregarded several rules:
1. All UCM transports started in their deployment zone.
2. Scourge unit that brought transports didn't have to start inside.

It was a great, albeit long, game, resulting in a Scourge victory,

We soon plan to play the reverse layout, so looking forward to that!

On the project table:
500 point soviet force: All built, only the infantry in the position of being painted (post about those coming soon)
Ghar starter set: Battle suits almost complete (post about those, also coming soon)

So as I said, next week I'll be on holiday, so all going well I should have a painting post the week after

Thursday 18 August 2016

Miniatures: Bolt Action - Soviet: 82mm Mortar

This week I have been working on the Bolt Action Soviet 82mm Mortar that came as part of the Warlord Soviet 500pts deal.

The Packaging


Standard blister pack, where some pressure can pop out the back panel, allowing reuse of the pack if required.

The models


This pack contains 3 crew, 1 mortar (2 pieces: stand & mortar) and a base.
The models are nicely detailed however one crew member appear's to be wearing a longcoat which doesn't really fit with my summer uniform force. This, of course, is a minor issue.

The building of the models


These models had a lots of flash and mold lines, which took several minutes to remove. The mortar was carefully clipped free of it's metal tag then glue was added to the rest part of the stand and the legs, these were then positioned on the base. Glue was applied to the base of the mortar then the mortar was carefully aligned with the stand. Once the mortar was in position the crew was positioned around.

Once the models were tidied up, it took no time to set up the base, I'm looking forward to painting these.

Friday 12 August 2016

Miniatures: Bolt Action - Soviet: Maxim MMG

This week I decided to crack on with putting my outstanding Bolt Action Soviets together, so I can have a game with something other than infantry. In this post I am reviewing the Maxim MMG.

The Packaging


This blister is like most "modern" blister where no cutting is required and just a little pressure from the front will pop out the back panel, releasing the models from their sponge walled plastic prison.


The models


Inside the blister are 3 crew, a Maxim MMG consisting of 4 parts (chasis, two wheels and the MMG) and a large round base.

The crew are nicely detailed, but the MMG lacks depth. (hopefully paint will resolve this)

The building of the model


The crew contained a fair amount of flash and mold lines that needed removing, as did the MMG with the added difficulty that the MMG wheels and chasis are made of a thin light metal so care had to be  taken to clear off excess metal.

The MMG was a little fiddly to build, and did result in me super gluing my fingers together along with a wheel. Despite this the building of the model wasn't challenging.

The MMG and crew were positioned on the base without glue then, once I was happy with their positioning, I glued them down. The gunner needed to be held in the correct position while the glue dried; as he is in a kneeling position I found he couldn't be left on its own otherwise he would fall out of position.

All in all this took little time to prepare and glue together. I'm looking forward to painting it up

FOR THE MOTHERLAND!!

Friday 5 August 2016

Painting: Dropzone Commander - Shaltari:Dreamsnare

While I'm working on other projects, none of which are ready to post about, here my Dreamsnare that I painted while ago as part of the DZC escalation I ran,

Details on how I painted it are below

Like always colours are from the Valejo game colour range unless stated otherwise.




  • I started by undercoating white using Halfords white primer.
  • I then liberally smothered the model in Army Painter Strong Tone, apart from the shield boosting relay which I accidentally covered in Soft tone. This will teach me to read the label. However I feel that it doesn't stand out too much.
  • Then once the Strong tone was dry I drybrushed several times with Bonewhite (72.034) 
  • I then drybrushed Dead White (72.001) several times
  • The pads were painted Electric Blue (72.023)
  • Then the Microwave-cannons, leg joints and leg points were painted Chainmail Silver (72.053), then coated with GW Nuln Oil, once dry I lightly painted the areas Silver (72.052).
  • Next I drybrushed all over with GW Ceramite White. 
  • The canopies were painted with Black (72.051)
  • The models were then cleaned up where needed. After which they were coated all over with Matt Varnish (70.520), followed by Gloss Varnish (70.510) which was applied to the black canopies, and the Gauss cannon barrels.